 | |  | |  | |  |
Repels: Hogs, Livestock, Raccoons & Squirrels
This is "IT"! No more need for varmint guards, traps, PVC pipes & cages. Shark Teeth render all
those products useless. Shark Teeth™ work on the principle of abstinence. If they can't touch it,
climb it, bump it or lick it; they can't tear it up, knock it over, eat up your feed or waste it!
Shark Teeth™ come in 36" strips that are 1 1/2" wide. There are three to a set, and the set
includes three self tapping screws per strip (9 total). Each strip has 4 parting lines 6" apart.
Each 6" strip has 4 pre-punched holes. You can apply complete 36" strips to feeder legs. Then
buy our single pack or triple pack and cover your Protein/Gravity Feeders head (or)
Control/Timer Box, to create a barrier that repels just about anything.
This is "IT"! No more need for varmint guards, traps, PVC pipes & cages. Shark Teeth render all
those products useless. Shark Teeth™ work on the principle of abstinence. If they can't touch it,
climb it, bump it or lick it; they can't tear it up, knock it over, eat up your feed or waste it!
Shark Teeth™ come in 36" strips that are 1 1/2" wide. There are three to a set, and the set
includes three self tapping screws per strip (9 total). Each strip has 4 parting lines 6" apart.
Each 6" strip has 4 pre-punched holes. You can apply complete 36" strips to feeder legs. Then
buy our single pack or triple pack and cover your Protein/Gravity Feeders head (or)
Control/Timer Box, to create a barrier that repels just about anything.
■Line the inside of the feeder legs to keep pigs from rubbing and bumping them.
■Line the outside of the feeder legs to prevent raccoons & squirrels from climbing, and pigs and
livestock from pushing and bumping your feeder.
■Break into 6" strips and install them on your protein feeder heads to prevent coons &
squirrels from climbing on them and chewing them.
■Break into 6" strips and screw or super glue to the top and side surfaces of your control/timer
box. This prevents coons from climbing on it & cows, horses, etc. from licking it.
■Remove that varmint cage and maximize the broadcast capabilities of your slinger. No more
water filled holes under the feeder wasting the feed the cage knocks down directly under the
feeder. When the cage stops the feed, it falls directly under the feeder. Deer, hogs, coons, etc.
eat under the feeder when it's dry and dig out a big depression under the feeder. When it
rains the depression fills with water and renders the feed useless.
■Install strips on your feeder lid to deter raccoons & large birds from roosting & defecating on
top of it.
■Shark Teeth™ have to many uses to list. Let your imagination run wild with Shark Teeth™!
Installing on round legs
■After installing the strips, take a hammer or blunt object and tap them down the contours of
the legs until they form to the rounded surface.
■Line the outside of the feeder legs to prevent raccoons & squirrels from climbing, and pigs and
livestock from pushing and bumping your feeder.
■Break into 6" strips and install them on your protein feeder heads to prevent coons &
squirrels from climbing on them and chewing them.
■Break into 6" strips and screw or super glue to the top and side surfaces of your control/timer
box. This prevents coons from climbing on it & cows, horses, etc. from licking it.
■Remove that varmint cage and maximize the broadcast capabilities of your slinger. No more
water filled holes under the feeder wasting the feed the cage knocks down directly under the
feeder. When the cage stops the feed, it falls directly under the feeder. Deer, hogs, coons, etc.
eat under the feeder when it's dry and dig out a big depression under the feeder. When it
rains the depression fills with water and renders the feed useless.
■Install strips on your feeder lid to deter raccoons & large birds from roosting & defecating on
top of it.
■Shark Teeth™ have to many uses to list. Let your imagination run wild with Shark Teeth™!
Installing on round legs
■After installing the strips, take a hammer or blunt object and tap them down the contours of
the legs until they form to the rounded surface.
|
Shark Teeth 3 Strip Pkg. 36" L x 1 1/2" W -
Only 29.99
Only 29.99
